KM+ Advanced Fuel Additives instantly improves quality of liquid fuel the moment it is mixed. All vehicles with internal combustion engine benefits from KM+ Advanced Fuel Additives.
KM+ Advanced Fuel Additives is 100% formulated from natural plants esters. It is non toxic, environment friendly and biodegradable. It is a well researched matured formula. It is non flammable & leaves no ash nor gum behind when it is burned with fuel. It is designed to address today’s competitive requirements for engine performance, fuel saving, maintenance and protection of combustion engines as well as fulfilling social responsibility of keeping a greener earth. A Truly Green Fuel Technology.
BioSurge Asia’s first and core product is Fuel Additives. It was previously sold under OEM brand, GoldOil, KyotoOil, VAS Oil and finally known as KM+ Advanced Fuel Additives.
KM+ Advanced Fuel Additives instantly improves quality of liquid fuel the moment it is mixed. All internal combustion engine benefits from KM+ Advanced Fuel Additives.
KM+ Advanced Fuel Additives is 100% formulated from natural plants esters. It is non toxic, environment friendly and biodegradable. It is a well researched matured formula. It is non flammable & leaves no ash nor gum behind when it is burned with fuel. Added to fuel, KM+ reduces unburn hydrocarbon molecules, there is significantly less toxic carbon monoxide, less oxides of nitrogen, less ground level ozone and less particulate matters. Tests done in PUSPAKOM confirms KM+ reduces black smoke opacity in diesel car significantly.It is designed to address today’s competitive requirements for engine performance, fuel saving, maintenance and protection of combustion engines as well as fulfilling social responsibility of keeping a greener earth.
REACH Compliance is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals. We are proud to say KM+ Advanced Fuel Additive helps to keep the air and environment cleaner, healthier and is REACH Compliant. A Truly Green Fuel Technology.
Graphics below shows how due to incomplete combustion, small amount of unburn hydrocarbon accumulates over time as layers of carbon deposit on the pistons. At the same time, some of these unburn hydrocarbon are being purged out as emission. All these are fuel wastages besides polluting the environment. When the layers grow thicker over time, the engine becomes sluggish and performs not as efficiently.
When you start adding KM+ Advanced Fuel Additives, KM+ atomizes fuel to ensure complete combustion with no carbon deposits. As for the carbon deposits that is already there, KM+ starts to gently cleans the engine fuel delivery systems, intake valves and combustion chambers. With continuous use, it will gradually clean up and remove the carbon deposit. This will gradually restore the Optimum compression ratio of the engine. The horsepower and torque improve. The acceleration improves.
With continuous use of KM+ Advanced Fuel Additives, the gradual cleansing continue to take place, gradually optimizing accuracy of fuel pump and fuel injectors. The fuel efficiency increase, you experience fuel savings and more mileage. At the same time, this process of cleansing prolong lifespan of fuel injectors and fuel pumps again resulting in lower maintenance costs.
KM+ Advanced Fuel Additives protects fuel injectors, fuel pumps and reduce wear and tear of fuel delivery systems. This reduce maintenance costs and thus lowers the overall Operation Costs.
As more government bodies around the world implement regulations to reduce Green House Gases emission to curb Climate Change, one of the main target is to reduce sulphur content in fuel. The biggest global initiative is from International Marine Organization that specifies marine fuel can have no more than 0.5% sulphur in ships’ fuel oil by year 2020.
While this is highly recommended for a sustainable environment, reduction of sulphur results in reduced lubricity in fuel and increases wear and tear of fuel injectors.KM+ Advanced Fuel Additives’ lubricity can compensate for this lubricity lost. The following Accelerated Wear Test done on a 8mm HRC50 hardened steel rod submerged in diesel showed KM+ can improve lubricity in low sulphur fuel.
KM+ Advanced Fuel Additives atomizes fuel, resulting in smaller fuel droplets with larger surface areas for interaction with oxygen from the air. This help to optimize fuel combustion, completing fuel combustion before upward stroke of the piston.
With optimized combustion KM+ Advanced Fuel Additives ensure all fuel molecules are converted into power to push the piston down. By completing the fuel molecules combustion, there is no unburn hydrocarbon wastage and only clean emission is purged out from the combustion chamber to the manifold.
From the above emission analysis chart, by adding KM+ Advanced Fuel Additives the toxic Carbon Monoxide is reduced to zero, the hydrocarbon emission is reduced by more than 90%But most important of all in this case is NOx is eliminated or reduced from 66ppm at high idle speed and 154ppm at low idle speed to complete Zero for both high and low idle speed after adding KM+ Advanced Fuel Additives. Nitrogen oxides (NOx) are poisonous gases derived from nitrogen and oxygen combustion under high pressure and temperatures. NOx is composed of nitric oxide (NO), and a smaller percentage of more poisonous nitrogen dioxide (NO2). Nitric oxide reacts with oxygen or ozone in the air to form nitrogen dioxide. Inhalation of the pure gases is rapidly fatal. Other oxides of nitrogen include NO3 (nitrogen trioxide), N2O (nitrous oxide), N2O4 and N2O5. Nitrous oxide is a potent greenhouse gas and also causes damage to the ozone layer. One tonne of Nitrous Oxide is equivalent to 298 tonnes of carbon dioxide and Nitrous oxide has an atmospheric lifetime of 110 years! So eliminating NOx from transport emission is extremely important.
From the CO2 %, you may have noticed the slight increase from High Idle Speed at 14.59% to 15.07% after adding KM+ This is consistent with more complete combustion as the fuel molecules are not wasted as unburned hydrocarbon fuel but instead combusted into carbon dioxide and water as explained in simple chart below. As the fuel molecules are more completely combusted and converted from chemical energy to kinetic energy, the car actually travels a longer distance than previously. As CO2 emission is measured as CO2 emitted per kilometer travelled, the final result is there is a reduction of CO2 perkm travelled.
Overall, there is a significant reduction of CO2 and Nitrous Oxide, the Green House Gases.
If KM+ Advanced Fuel Additives were not added into fuel, the green area above would have been emission of Oxides of Nitrogen within the time period of only 50 seconds! Can you imagine how much Oxides of Nitrogen is being emitted into the air as you travel everyday? KM+ Advanced Fuel Additives helps to green our earth by complete combustion and thus avoiding the emission of these gases. Similar concept for the Carbon Monoxide chart and Hyrocarbon emission chart below.
Below is a chart of a standard normal fuel combustion. This standard fuel combustion burns fuel slower than it takes to burn efficiently. Not all fuel molecules compelte combustion before the piston upward stoke. Some fuel molecules are still burning during the piston upward stroke and continue burning in the exhaust pipe. This is a wastage of your fuel molecule. This is also the hydrocarbon emission, appearing as black smoke when the wastage is larger molecules or as PM10 and PM2.5 when smaller and cannot be seen with the naked eyes.
KM+ Advanced Fuel Additives atomizes fuel into finer mist enabling fuel molecules to achieve Optimized Combustion, reducing black smoke emission.Following are examples of how KM+ Advanced Fuel Additives helps to reduce Black Smoke emission.
BioSurge Asia has proven result that our environment friendly fuel additives has achieved our objective of reducing CO2 emissions from combustion engines. We have achieved 15.4% improve in fuel economy test done by Emission Analytics and with comment from Emission Analytics UK"This result is impressive, to the point of being significantly better than other products of a similar type tested by Emissions Analytics recently. Increases in fuel economy above 5% are unusual."
On our test in the recent months with newer car like Toyota Corolla Altis 1.8 2013 and VW Jetta 1.4 TSI, we achieved better fuel economy by 28.4% and 26% respectively.
We are proud to be able to provide a solution that not only can assist in reducing transport or engine emission but is also the answer to lower cost of operation for all types of combustion engines.
